Small Ozone Generator Integrated for Water Treatment and Air Disinfection

• Customization: Available
• After-sales Service: After-Sales Service
• Warranty: 1 Year
• Model NO.: HMS-Y-100G
• Certification: CE
• Dielectric Material: Glass Tube
• Cooling Method: Water-Cooling
• Gas: Oxygen
• Frequency: >1000Hz
• Installation: Portable
• Type: High Pressure Discharge Type
• Ozone Production Capacity: 100g/H
• Output Voltage: 4kv
• Working Freqency: 6.5kHz
• Shell Material: Stainless Steel 304
• Transport Package: Wooden
• Specification: 80*40*140mm
• Trademark: HCZHUN
• Origin: China
• Production Capacity: 100000sets Per Year

Product Description

Product Description

1. High voltage discharge generator
This type of ozone generator uses a high-frequency power supply system tocause electrochemical reactions of oxygen molecules inside or around theelectric field, thereby producing ozone. This ozone generator has theadvantages of mature technology, stable operation, long service life, andlarge ozone production, making it the most widely used ozone generator inrelated industries both domestically and internationally.
2.Ozone safe cooling method
The ozone generator generates a large amount of heat energy duringoperation and reouires cooling, otherwise ozone will decompose at thesame time due to high temperature. The water-cooled generator has goodcooling effect, stable operation, no attenuation of ozone, and can workcontinuously for a long time.
3.Ozone generator discharge technologyquartz tubes are most commonly used in high-performance ozonegenerators due to their high dielectric constant, uniform wall thickness.Good ellipticity, high temperature resistance, and moisture resistance.Ceramic plates are prone to cracking and are only suitable for smallgenerators. The wall thickness and ellipticity of ceramic tubes aredifficult to control, which can lead to uneven discharge. So they are notwidely used. Glass and enamel tubes have low dielectric constant, poorhigh-temperature resistance, and are prone to cracking
4. WORKING PRINCIPLE
When a gas containing oxygen passes through the discharge gap between twoelectrodes, some oxygen molecules (O2) are converted into ozone (O3) to achieveozone preparation (see Figure 1). When there is a varying high voltage on thehigh-voltage electrode, micro discharge will occur at the discharge gap between theelectrodes. Oxygen molecules are decomposed into free state oxygen atoms O, andsome free state oxygen atoms recombine with undecomposed oxygen molecules toform ozone (O3), which is called "corona discharge" or "silent discharge"In fact, only a portion of the electrical energy applied to the electrode is used toprepare ozone, which also generates heat during the preparation process. Coolingwater is needed to effectively cool the ozone generation module. The process of ozonepreparation is significantly affected by the quality of raw gas and the temperature ofcooling water. The lower the temperature, the higher the efficiency of ozonepreparation.
5.Ozone process flow
The composition of the ozone generator system includes: gas source system andozone generator host.
 

Product Parameters

Product specification	80*48*140 (L *W*H CM )
Ozone production	10 0 (g/H)
Machine form	floor fixed/mobile
Shell material	304 stainless steel
Operating Voltage	AC220V/50HZ±5%
Rated power	2.2KW
Ozone concentration	80-120mg/L
Working frequency	6.5KHZ
The output voltage	4KV
Outlet pressure	0.08-0.1MPA
Ozone outlet	10mm quick twist connector / DN15 optional
Cooling water import and export	Pagoda outer diameter 10MM/DN15 optional
Cooling method	Water cooling water flow > 15L/min Water temperature < 30°C
Use environment	Dry and clean, temperature < 40 ºC, relative humidity ≤ 8 5 %RH; it is strictly forbidden to use in flammable and explosive places.
Machine configuration	Oil-free air compressor, condenser, gas-water separation automatic drainage, SPA oxygen system 20L/min, water-cooled honeycomb gap discharge ozone tube, ozone power supply, cooling fan, control circuit (microcomputer time controller, working indicator light, air pump switch, ozone switch, digital display power parameter meter, etc.)
Main feature	Automatic work (multiple sets of timing switch settings, time error ± seconds/month), can realize unmanned operation Manual work (free switch, switch and use at any time, use at any time); Gas volume adjustment (the device comes with a gas flow meter, adjust the gas volume as needed) Concentration adjustment (the machine comes with a concentration regulator, which can be adjusted arbitrarily from 5% to 100% according to needs)

 

Detailed Photos